03.003 How do I set up a Transwarp on my IIe?
Description
This article is from the Apple II Csa2 FAQ, by Jeff Hurlburt with numerous contributions by others.
03.003 How do I set up a Transwarp on my IIe?
Bank1: Sw 1-7 -> Change to OPEN if there is a memory card that uses the
"Langauge Card bank switching technique". (Normally CLOSED)
Bank1: Sw 1-7 -> Change to OPEN if the plug in card must be accessed at 1 MHz
(Normally CLOSED. OPEN for Floppy diskette controllers)
Switch 8 on both Banks: Sets the power up speed of Transwarp
Bank1 Bank2
3.6 MHz OPEN OPEN <<Normal>>
1.7 MHz CLOSED OPEN
1 MHz OPEN CLOSED
1 MHz CLOSED CLOSED
----------------------
Continue to:
My Books
