lotus

previous page: 8.1 Types of Refractive Surgery
  
page up: Vision and Eye Care FAQ
  
next page: 8.2.1 Suitability for each procedure

8.2 Description of the Procedures:




Description

This article is from the Vision and Eye Care FAQ, by grants@research.canon.com.au (Grant Sayer) with numerous contributions by others.

8.2 Description of the Procedures:


RK involves making 4 or 8 radial cuts in the surface of the cornea.
Previously 16 cuts were used but this was found to give too much refractive
instability and glare. As the incisions heal the resulting scar tissue
flattens the cornea.

PRK uses an excimer laser to photo-ablate or resculpt the surface of the
cornea. The excimer laser is a charged beam of argon and fluoride gases in
a mirrored tube to produce a beam of ultraviolet light. The beam is unique
because it possesses the ability to vaporize living tissue, a microscopic
layer at the time without destroying or burning the surrounding tissue.
The energy from the laser breaks the bonds between molecules, with each
pulse taking off about 0.4 microns of tissue (a human hair is between 50-100
microns thick). A person with -5 correction would require 200 pulses.

The LASIK and ALK procedure has 4 steps (in myopia) and 3 for hyperopia
- A gentle suction ring places an instrument known as a Corneal
Shaper over the cornea.

- A blade in the Cornea Shaper is then passed over the cornea and
removes a paper-thin film of tissue (the corneal surface).
The tissue is not completely removed, but is left attached to
the eye on one side, and is folded out of the way.

- A second cutting pass removes the amount of tissue needed to put
the prescription of the eye into the cornea.

- The surface layer is replaced, and air dried slightly to allow it
to stay in place.

 

Continue to:













TOP
previous page: 8.1 Types of Refractive Surgery
  
page up: Vision and Eye Care FAQ
  
next page: 8.2.1 Suitability for each procedure