lotus



previous page: 8.1.7. I need to cut the piano wire control rods. Bolt cutters don't work well, as the metal is too hard. Any ideas?
  
page up: Model Rockets FAQ
  
next page: 8.2.1 What is the difference between a Boost/Glider and a Rocket/Glider?

8.2 Free Flight Boost and Rocket Gliders




Description

This article is from the Model Rockets FAQ, by Wolfram von Kiparski with numerous contributions by others.

8.2 Free Flight Boost and Rocket Gliders

Copyright (c) 1996-2002 by Robert G. Kaplow. Permission granted for
non-profit distribution and may be reproduced by any individual for
non-profit use, provided that the source and author of this document is
acknowledged. The distribution and reproduction of this document for
commercial use without permission of the author is specifically denied,
specifically including the storage of this document on any server owned by
YAHOO.COM or any affiliate or subsidiary. Any other use requires the
permission of the author. Feedback can be sent to
kaplow_r@encompasserve.org

 

Continue to:















TOP
previous page: 8.1.7. I need to cut the piano wire control rods. Bolt cutters don't work well, as the metal is too hard. Any ideas?
  
page up: Model Rockets FAQ
  
next page: 8.2.1 What is the difference between a Boost/Glider and a Rocket/Glider?