WANGTEK 5525ES, WANGTEK 51000HT, WANGTEK 52000HT Tape drive card Settings and Configuration
TECMAR
WANGTEK 5525ES, WANGTEK 51000HT, WANGTEK 52000HT
Device Type | Internal Tape Drive |
Interface | SCSI |
Format | Quarter Inch |
Sustained Transfer Rate | Unidentified |
Size | 3.5 in. half height (5.25 in. half height with bezel) |
View | Bottom |
DRIVE SELECT ID | ||||
Drive ID | JP1/Pins 1 & 2 | JP1/Pins 3 & 4 | JP1/Pins 5 & 6 | |
0 | Open | Open | Open | |
1 | Closed | Open | Open | |
2 | Open | Closed | Open | |
3 | Closed | Closed | Open | |
| » | 4 | Open | Open | Closed |
5 | Closed | Open | Closed | |
6 | Open | Closed | Closed | |
7 | Closed | Closed | Closed | |
TERMINATION POWER SELECTION | ||
Setting | E1 | |
| » | TERMPWR supplied by drive | Closed |
TERMPWR supplied by drive to SCSI interface | Open | |
MANUFACTURERS RECOMMENDED MEDIA | ||
Drive | Tape | Capacity Without Compression |
5525ES | DC6250 | 250 MB |
5525ES | DC6525 | 525 MB |
51000HT | DC6250 | 250 MB |
51000HT | DC6525 | 525 MB |
51000HT | DC9120 | 1.2 GB |
52000HT | DC6250 | 250 MB |
52000HT | DC6525 | 525 MB |
52000HT | DC9120 | 1.2 GB |
52000HT | DC9250 | 2.5 GB |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Amber | Flashing | Drive activity on the SCSI bus |
LED1 | Amber | Pulsing | Drive fault condition exists |
LED1 | Amber | Off | Drive not active |
Note: "Pulsing" LED1 refers to a flash 1-5 times every 3 seconds. | |||
My Books
