TDC 6142 Tape drive card Settings and Configuration
TANDBERG DATA
TDC 6142
Device Type | Tape Drive |
Interface | SCSI-2 Differential |
Format | QIC-5010-DC; QIC-5010-DC single-ch.; QIC-5GB; QIC-2GB; QIC-1000C; QIC-525; QIC-150; QIC-120 |
Sustained Transfer Rate | Unidentified |
Size | 5.25 in. half height |
View | Top |
CONNECTIONS | |
Function | Label |
Ground connector | CN1 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Factory configured - do not alter. | JP1/Pins 5 & 6 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 7 & 8 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 9 & 10 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 11 & 12 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 13 & 14 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 15 & 16 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 17 & 18 | Unidentified |
| » | Factory configured - do not alter. (Parity enable/disable) | JP1/Pins 19 & 20 | Unidentified |
Termination enabled | JP1/Pins 29 & 30 | Closed | |
Termination disabled | JP1/Pins 29 & 30 | Open | |
Note: Pins 2 and 4 are used to connect the drive to certain test tools related to serial in/out communication. | |||
DRIVE SELECT ID | ||||
Drive ID | JP1/Pins 21 & 22 | JP1/Pins 23 & 24 | JP1/Pins 25 & 26 | JP1/Pins 27 & 28 |
0 | Open | Open | Open | Open |
1 | Closed | Open | Open | Open |
2 | Open | Closed | Open | Open |
3 | Closed | Closed | Open | Open |
4 | Open | Open | Closed | Open |
5 | Closed | Open | Closed | Open |
6 | Open | Closed | Closed | Open |
7 | Closed | Closed | Closed | Open |
8 | Open | Open | Open | Closed |
9 | Closed | Open | Open | Closed |
10 | Open | Closed | Open | Closed |
11 | Closed | Closed | Open | Closed |
12 | Open | Open | Closed | Closed |
13 | Closed | Open | Closed | Closed |
14 | Open | Closed | Closed | Closed |
15 | Closed | Closed | Closed | Closed |
TEST FUNCTIONS | ||||
Function | Pins 21 & 22 | Pins 23 & 24 | Pins 25 & 26 | Pins 27 & 28 |
Read/Write Selftest | Open | Open | X | X |
Extended Drive Selftest | Closed | Open | X | X |
Mainboard Selftest | Open | Closed | X | X |
Combined Selftest | Closed | Closed | X | X |
Continuous Mode | X | X | X | Closed |
Stop-at-Failure Mode | X | X | Closed | X |
Note: Pins 1 & 3 jumpered for all testing purposes. ‘X’ means don’t care. | ||||
TERMINATION POWER SELECTION | |
Setting | JP1/Pins 31 & 32 |
TERMPWR supplied by drive | Closed |
TERMPWR supplied by SCSI interface to drive | Open |
MANUFACTURERS RECOMMENED MEDIA | ||
Tape | Capacity Without Compression | Capacity With Compression |
QIC-5010-DC | 13.0 GB | Unidentified |
QIC-5010-DC single-ch. | 13.0 GB | Unidentified |
QIC-5GB | 5.0 GB | Unidentified |
QIC-2GB | 2.0 GB | Unidentified |
QIC-1000C | 1.0 GB | Unidentified |
QIC-525 | 525 MB | Unidentified |
QIC-150 | 155 MB | Unidentified |
QIC-120 | 120 MB | Unidentified |
My Books
