CP 150SE Tape drive card Settings and Configuration
SANKYO
CP 150SE
Device Type | Tape Drive |
Interface | SCSI |
Format | QIC-11(read-only), QIC-24 (read-only), QIC-120, QIC-150 |
Sustained Transfer Rate | 113KBPS |
Size | 5.25 in. half height |
View | Bottom |
CONNECTIONS | |
Function | Label |
Ground connector | CN1 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Factory configured - do not alter. | BR1 | Unidentified |
| » | Factory configured - do not alter. | BR2 | Unidentified |
| » | Factory configured - do not alter. | J1 | Unidentified |
| » | Factory configured - do not alter. | J4 | Unidentified |
| » | Factory configured - do not alter. | J5 | Unidentified |
| » | Factory configured - do not alter. | J10 | Unidentified |
| » | Factory configured - do not alter. | JPS | Unidentified |
| » | Factory configured - do not alter. | SB1 | Unidentified |
| » | Parity enabled (odd) | JP1/Pins 7 & 8 | Open |
Parity disabled | JP1/Pins 7 & 8 | Closed | |
DRIVE SELECT ID | ||||
Drive ID | JP1/Pins 1 & 2 | JP1/Pins 3 & 4 | JP1/Pins 5 & 6 | |
| » | 0 | Closed | Closed | Closed |
1 | Open | Closed | Closed | |
2 | Closed | Open | Closed | |
3 | Open | Open | Closed | |
4 | Closed | Closed | Open | |
5 | Open | Closed | Open | |
6 | Closed | Open | Open | |
7 | Open | Open | Open | |
TERMINATION POWER SELECTION |
Note: External termination via pin 26 of interface. |
MANUFACTURERS RECOMMENED MEDIA | |
Tape | Capacity |
QIC-11 450ft. | 45MB |
QIC-24 450/600ft. | 45/60MB |
QIC-120 600ft. | 125MB |
QIC-150 600/1,000ft. | 150/250MB |
My Books
