COMPAQ COMPUTER CORPORATION
12/24 GB DAT 6 CASSETTE AUTOLOADER (EXTERNAL)
Device Type | External Tape Drive |
Interface | SCSI-2 |
Format | DDS-3 |
Sustained Transfer Rate | 1 MBPS (native), 2 MBPS (compressed) |
Size | 5.25 in. full height |
View | Top |
AUTOLOADER OPTIONS |
Note: To configure the AutoLoader options, press the buttons on SW2 until the desired option number |
appears in the viewing window. Default value is 4. |
DRIVE SELECT ID |
Note: To set the SCSI ID, press the buttons on SW1 until the desired SCSI ID number appears in the |
viewing window. Default value is 6. |
MANUFACTURERS RECOMMENDED MEDIA |
Tape |
Sony 60m (DG-60M) |
Fuji 90m (DG-90M) |
Fuji 120m (DG-120M) |
Sony 125m (DGD-125m) |
Fuji 125m (DG3-125m) |
Maxell 125m (HS 4/125s) |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | A tape magazine is loaded in the drive |
LED1 | Green | Blinking | A tape magazine is being loaded in the drive or self-test in progress |
LED1 | Green | Off | A tape magazine is not loaded in drive |
LED2 | Green | On | A cartridge is loaded in the drive |
LED2 | Green | Blinking fast | The drive is reading/writing or tape activity other than loading/unloading in progress. |
LED2 | Green | Blinking slow | A cartridge is being loaded in drive or self-test in progress |
LED2 | Green | Off | No tape activity |
LED3 | Amber | On | A fatal hardware error has occurred |
LED3 | Amber | Blinking | A non-fatal error has occurred |
LED3 | Amber | Off | Drive operation is good |