DATA 8008E SERIES Tape drive card Settings and Configuration

Device Type	Tape Drive
Interface	SCSI-2
Format	DDS-2
Sustained Transfer Rate	Unidentified
Size	4.56 in. (w) x 3.94 in. (h)
View	Top

DRIVE SELECT ID

Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window. Press the (+) button to select a higher ID, press the (-) button to select a lower ID.

MANUFACTURERS RECOMMEND MEDIA
Tape	Capacity Without Compression	Capacity With Compression
90 meter cartridge	2.0 GB	Unidentified
120 meter cartridge	Unidentified	8.0 GB

DIAGNOSTIC LED(S)
LED1	LED2	LED3	Condition
Off	Off	Off	Tape not loaded/No activity
On	Off	Off	Read or write to tape
Flash 1	Flash 1	Off	Loading/Unloading
Flash 1	Flash 1	On	Loading/Unloading write protected
Off	On	Flash 1	Cleaning cartridge at end of media (no cleaning cycles remaining)
Off	On	Off	Loaded/No activity
On	On	Off	Loaded/SCSI activity
Flash 1	On	Off	Loaded/SCSI - drive activity
N/A	On	On	Loaded/Write protected
N/A	Flash 3	N/A	Media Caution Signal (1) - excessive errors detected
Flash 3	N/A	N/A	High humidity detected
N/A	N/A	Flash 3	Media Caution Signal (2) - tape head motion hours reached
N/A	N/A	Flash 2	Drive mechanical failure/Drive circuitry failure
Flash 2	N/A	N/A	Waiting for reset
N/A	Flash 2	N/A	Waiting for eject
Note: Flash 1 = .25 seconds On, .25 seconds Off; Flash 2 = .25 seconds On, 1 second Off; Flash 3 = 3.5 seconds On, .25 seconds Off.