DIALOGIC CORPORATION
D/41EPCI
Card Type | Voice processor card |
Chip Set | Motorola |
Maximum Onboard Memory | Unidentified |
I/O Options | RJ-11 jacks (4), CTbus interface, 52-pin connector, 20-pin connectors (2) |
Data Bus | 32-bit PCI |
Card Size | Full-length, full-height |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
CTbus interface | CN1 | Channel 4 via RJ-11 | J4 | |||
Channel 1 via RJ-11 | J1 | 52-pin fax daughter card connector | J5 | |||
Channel 2 via RJ-11 | J2 | 20-pin fax daughter card connector | J6 | |||
Channel 3 via RJ-11 | J3 | 20-pin fax daughter card connector | J7 |
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
Board ID selection | SW1 | See note |
» Hook switch set for on hook operation | SW2/1 | Off |
Hook switch set to off hook operation | SW2/1 | On |
» Board ID range set to 0 - 15 | SW2/2 | Off |
Board ID range set to 16 - 31 | SW2/2 | On |
Note: SW1 is a rotary switch used to determine the Board ID settings. The default Board ID setting is 0. SW1 is used in concurrence with SW2/2. |
BOARD TERMINATION SETTINGS | ||||||||
Setting | JP2 | JP3 | JP4 | JP5 | ||||
» Termination disabled | Open | Open | Open | Open | ||||
Termination enabled | Closed | Closed | Closed | Closed |
CTBUS CLOCK SIGNAL SETTINGS | ||||
Setting | JP6 | JP7 | ||
SCbus | Pins 1 & 2 closed | Pins 1 & 2 closed | ||
MVIP | Pins 2 & 3 closed | Pins 2 & 3 closed |
DIAGNOSTIC LED | |||
LED | Color | Status | Condition |
CR5 | Unidentified | On | The card is receiving power |
CR5 | Unidentified | Off | The card is not receiving power |