NX-110PCI Network Card Settings and Configuration
MAXTECH CORPORATION
NX-110PCI
Card Type | Ethernet |
Data Bus | 32-bit PCI |
Maximum Network Rate | 10Mbps/100Mbps |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
UTP 100Mbps port | CN1 | RJ-58A/U 50ohm coaxial 10Mbps port | CN3 |
UTP 10Mbps port | CN2 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Network connection is good (100Mbps) |
LED1 | Green | Off | Network connection is broken (100Mbps) |
LED2 | Green | On | 10Base-T/100Base-TX network connection is good |
LED2 | Green | Off | 10Base-T/100Base-TX network connection is broken |
LED3 | Green | On | Data is being received |
LED3 | Green | Off | Data is not being received |
LED4 | Yellow | On | Collision is detected on network (10Mbps only) |
LED4 | Yellow | Off | Collision is not detected on network (10Mbps only) |
My Books
