LINKSYS
ETHERFAST 10BASET/100BASET -TX
NIC Type | Ethernet |
Chipset | Digital Equipment Corporation |
Network Transfer Rate | 10Mbps/100Mbps |
Data Bus | 32-bit PCI |
Topology | Star |
Wire Type | Shielded/Unshielded twisted pair |
Boot ROM | Not available |
LINKSYS-Ethernet-ETHERFAST-10BASET-100BASET-TX
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Network is operating at 10Mbps |
LED1 | Unidentified | Off | Network is operating at 100Mbps |
LED2 | Unidentified | On | Power is on |
LED2 | Unidentified | Off | Power is off |
LED2 | Unidentified | Blinking | Card is transmitting data |
LED3 | Unidentified | On | Network connection is good |
LED3 | Unidentified | Off | Network connection is broken |
LED3 | Unidentified | Blinking | Card is receiving data |
LED4 | Unidentified | On | Network collision detected |
LED4 | Unidentified | Off | Network collision not detected |
MISCELLANEOUS TECHNICAL NOTE |
Diagram not available. |