5511 PCI FDDI ADAPTER (SAS SC DUPLEX PB05511-000) Network Card Settings and Configuration
INTERPHASE CORPORATION
5511 PCI FDDI ADAPTER (SAS SC DUPLEX PB05511-000)
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Unidentified |
Network Transfer Rate | 100Mbps |
Topology | Ring, Peer-Peer |
Wiring Type | Fiber optic cable |
Data Bus | 32-bit PCI |
CONNECTIONS | |
Function | Label |
Fiber optic connector - SC | CN1 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Factory configured - do not alter. | JP1 | Unidentified |
| » | Factory configured - do not alter. | JP2 | Unidentified |
| » | Factory configured - do not alter. | JP3 | Unidentified |
| » | Factory configured - do not alter. | JP4 | Unidentified |
DIAGNOSTIC LED(S) CONTINUED | ||||
LED1 | LED2 | LED3 | LED4 | Condition |
On | Off | On | Blinking | Power-on diagnostics |
On | Off | Blinking | Off | Connecting to ring |
On | Off | Blinking | On | Ring connected |
On | On | Off | Off | Adapter Failure |
My Books
