FT-LANCVR/TP Network Card Settings and Configuration

IMC NETWORKS CORPORATION

FT-LANCVR/TP

Card Type
Ethernet Transceiver
NIC Type
Ethernet
Maximum Onboard Memory
Unidentified
Boot ROM
Not available
Network Transfer Rate
10Mbps
Topology
Linear Bus, Star
Wiring Type
RJ-45 Shielded twisted pair, RJ-45 Unshielded twisted pair,
AUI transceiver via DB-15 port
Data Bus
External

CONNECTIONS
Function
Label
Function
Label
AUI connector
CN1
RJ-45 crossover connector
CN4
RJ-45 crossover connector
CN2
RJ-45 pass-through connector
CN5
RJ-45 pass-through connector
CN3

Note: Each port contains two RJ-45 connectors. Only one may be used at a time. Either the crossover connector which is for connecting to a network interface card, or the pass-through connector which is for connecting to a hub or repeater.

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
SQE disabled
SW1
Off

SQE enabled
SW1
On
»
Alarm enabled
SW2
On

Alarm disabled
SW2
Off
»
Mode 1 enabled
SW3
On

Mode 2 enabled
SW3
Off

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
LED1
Green
On
Valid data detected (CN2 or CN3)
LED1
Green
Off
Valid data not detected (CN2 or CN3)
LED2
Red
Blinking
Network connection is broken (CN2 or CN3)
LED2
Red
Off
Network connection is good (CN2 or CN3)
LED3
Green
On
Network connection is good (CN2 or CN3)
LED3
Green
Off
Network connection is broken (CN2 or CN3)
LED4
Green
On
Valid data detected (CN4 or CN5)
LED4
Green
Off
Valid data not detected (CN4 or CN5)
LED5
Red
Blinking
Network connection is broken (CN4 or CN5)
LED5
Red
Off
Network connection is good (CN4 or CN5)
LED6
Green
On
Network connection is good (CN4 or CN5)
LED6
Green
Off
Network connection is broken (CN4 or CN5)
LED7
Amber
On
SQE enabled
LED7
Amber
Off
SQE disabled
LED8
Amber
On
Hardware malfunction detected
LED8
Amber
Off
Hardware functioning correctly
LED9
Red
On
Collisions detected on network
LED9
Red
Off
No collisions detected on network
LED10
Amber
On
Data is being received
LED10
Amber
Off
Data is not being received
LED11
Green
On
Data is being transmitted
LED11
Green
Off
Data is not being transmitted
LED12
Green
On
Power is being supplied via the AUI connector
LED12
Green
Off
Power is not being supplied via the AUI connector

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

FT-LANCVR/TP Network Card Settings and Configuration

Search

My Books

Discover

Card Type	Ethernet Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Linear Bus, Star
Wiring Type	RJ-45 Shielded twisted pair, RJ-45 Unshielded twisted pair, AUI transceiver via DB-15 port
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI connector	CN1	RJ-45 crossover connector	CN4
RJ-45 crossover connector	CN2	RJ-45 pass-through connector	CN5
RJ-45 pass-through connector	CN3
Note: Each port contains two RJ-45 connectors. Only one may be used at a time. Either the crossover connector which is for connecting to a network interface card, or the pass-through connector which is for connecting to a hub or repeater.

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	SQE disabled	SW1	Off
	SQE enabled	SW1	On
»	Alarm enabled	SW2	On
	Alarm disabled	SW2	Off
»	Mode 1 enabled	SW3	On
	Mode 2 enabled	SW3	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Valid data detected (CN2 or CN3)
LED1	Green	Off	Valid data not detected (CN2 or CN3)
LED2	Red	Blinking	Network connection is broken (CN2 or CN3)
LED2	Red	Off	Network connection is good (CN2 or CN3)
LED3	Green	On	Network connection is good (CN2 or CN3)
LED3	Green	Off	Network connection is broken (CN2 or CN3)
LED4	Green	On	Valid data detected (CN4 or CN5)
LED4	Green	Off	Valid data not detected (CN4 or CN5)
LED5	Red	Blinking	Network connection is broken (CN4 or CN5)
LED5	Red	Off	Network connection is good (CN4 or CN5)
LED6	Green	On	Network connection is good (CN4 or CN5)
LED6	Green	Off	Network connection is broken (CN4 or CN5)
LED7	Amber	On	SQE enabled
LED7	Amber	Off	SQE disabled
LED8	Amber	On	Hardware malfunction detected
LED8	Amber	Off	Hardware functioning correctly
LED9	Red	On	Collisions detected on network
LED9	Red	Off	No collisions detected on network
LED10	Amber	On	Data is being received
LED10	Amber	Off	Data is not being received
LED11	Green	On	Data is being transmitted
LED11	Green	Off	Data is not being transmitted
LED12	Green	On	Power is being supplied via the AUI connector
LED12	Green	Off	Power is not being supplied via the AUI connector