G/ETHERNET 16 COMBO ADAPTER Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Star
Wiring Type	AUI transceiver via DB-15 port Unshielded twisted pair RG58A/U 50ohm
Boot ROM	Available

CABLE TYPE
Type		JP11	JP12	JP13
»	Unshielded twisted pair	Open	Closed	Open
	RG58A/U 50ohm coaxial	Closed	Open	Open
	AUI transceiver via DB-15 port	Open	Open	Closed

DIAGNOSTIC LED OPTIONS
LED Option		JP9
»	On-board link test LED enabled	Pins 1 & 3 closed
	External link test LED	Pins 3 & 4 closed
	External receive data LED	Pins 5 & 6 closed
	External transmit data LED	Pins 7 & 8 closed
	External collision detection LED	Pins 9 & 10 closed
Note:Due to card design, you may only connect up to three external LEDs at one time.

DEVICE I/O ADDRESS
Address		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
»	2A0h - 2BFh	On	Off	On	Off	Off	Off
	260h - 27Fh	On	On	On	Off	Off	Off
	280h - 29Fh	Off	On	On	Off	Off	Off
	2E0h - 2FFh	Off	Off	On	Off	Off	Off
	300h - 31Fh	On	On	Off	Off	Off	Off
	320h - 33Fh	Off	On	Off	Off	Off	Off
	380h - 39Fh	On	Off	Off	Off	Off	Off
	3E0h - 3FFh	Off	Off	Off	Off	Off	Off

FACTORY CONFIGURED SETTINGS
Switch	Setting
SW1/switch 7	Off
SW1/switch 8	Off

INTERRUPT SETTINGS
IRQ		JP10A	JP10B	JP10C	JP10D	JP10E	JP10F	JP10G	JP10H	JP10I	JP10J
»	5	Open	Open	Open	Closed	Open	Open	Open	Open	Open	Open
	2/9	Closed	Open	Open	Open	Open	Open	Open	Open	Open	Open
	3	Open	Closed	Open	Open	Open	Open	Open	Open	Open	Open
	4	Open	Open	Closed	Open	Open	Open	Open	Open	Open	Open
	6	Open	Open	Open	Open	Closed	Open	Open	Open	Open	Open
	7	Open	Open	Open	Open	Open	Closed	Open	Open	Open	Open
	10	Open	Open	Open	Open	Open	Open	Closed	Open	Open	Open
	11	Open	Open	Open	Open	Open	Open	Open	Closed	Open	Open
	12	Open	Open	Open	Open	Open	Open	Open	Open	Closed	Open
	15	Open	Open	Open	Open	Open	Open	Open	Open	Open	Closed

DIAGNOSTIC LED
LED	Color	Status	Condition
LED1	Green	On	Network connection is good
LED1	Green	Off	Network connection is broken