MAGNUM CT1A Network Card Settings and Configuration
GARRETT COMMUNICATIONS
MAGNUM CT1A
Card Type | Ethernet Transceiver |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus |
Wiring Type | AUI transceiver via DB-15 port, RG-58A/U 50ohm coaxial |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | RG-58A/U 50ohm coaxial | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | SQE enabled | SW1 | On |
SQE disabled | SW1 | Off | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Power is on |
LED1 | Green | Off | Power is off |
LED2 | Yellow | On | SQE is enabled |
LED2 | Yellow | Off | SQE is disabled |
MISCELLANEOUS TECHNICAL NOTES |
The AUI port should be directly connected to the workstation. If you cannot connect to the workstation directly, an AUI drop cable (which cannot exceed 3 feet in length) may be used. |
My Books
