SPEEDLINK/PC-16 Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear bus Star
Wiring Type	RG58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Location Unidentified

I/O ADDRESS SELECT
Node	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8
340-343h	On	On	On	On	Off	On	Off	Off
348-34Bh	On	Off	On	On	Off	On	Off	Off
358-35Bh	On	On	Off	On	Off	On	Off	Off
358-35Bh	On	Off	Off	On	Off	On	Off	Off
360-363h	On	On	On	Off	Off	On	Off	Off
368-36Bh	On	Off	On	Off	Off	On	Off	Off
370-373h	On	On	Off	Off	Off	On	Off	Off
378-37Bh	On	Off	Off	Off	Off	On	Off	Off
390-393h	On	On	Off	On	On	Off	Off	Off
398-39Bh	On	Off	Off	On	On	Off	Off	Off

CABLE TYPE SELECT
Setting		JP1
»	Thin Ethernet	Pins 2 & 3 closed
	Ethernet	Pins 1 & 2 closed

PERFORMANCE LEVEL SELECT
Setting		JP2
»	High	Open
	Normal	Closed

BASE MEMORY ADDRESS SELECT
Address Range	JP3/A	JP3/B	JP3/C
Boot ROM disabled	Closed	Closed	Closed
C4000-C7FFF	Open	Open	Open
C8000-CBFFF	Open	Closed	Closed
CC000-CFFFF	Closed	Open	Closed
D0000-D3FFF	Open	Open	Closed
D4000-D7FFF	Closed	Closed	Open
D8000-DBFFF	Open	Closed	Open
DC000-DFFFF	Closed	Open	Open

ETHERNET FRAME TYPE SELECT
Setting		JP4
»	802.3	Pins 1 & 2 closed
	802.2	Pins 2 & 3 closed

IOCHRDY
Setting		JP5
»	Normal IOCHRDY	Pins 1 & 2 closed
	Early IOCHRDY	Pins 2 & 3 closed

MISCELLANEOUS TECHNICAL NOTE

Note: Interrupt selection is configured via a proprietary software package..