ETHERWORKS TURBO PCI EHTERNET CONTROLLER Network Card Settings and Configuration
DIGITAL EQUIPMENT CORPORATION
ETHERWORKS TURBO PCI EHTERNET CONTROLLER
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Unidentified |
Network Transfer Rate | 20Mbps (Full Duplex) |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Data Bus | 32-bit PCI |
CONNECTIONS | |||
Function | Label | Function | Label |
UTP via RJ-45 connector | CN1 | RG-58A/U connector | CN3 |
AUI transceiver via DB-15 port | CN2 | ||
USER CONFIGURABLE SETTINGS | ||
Function | JP1 | |
| » | AUI connection to 10Base2 Thin Wire Ethernet network enabled | Rows 1 & 2 closed |
AUI connection to Ethernet network using AUI cable enabled | Rows 2 & 3 closed | |
Note: For connection to a 10Base-T twisted pair Ethernet network, JP1 has no effect. | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
Network Activity | Amber | On/Blinking | Data is being transmitted/received |
Network Activity | Amber | Off | Data is not being transmitted/received |
TP Link | Green | On | UTP link is good |
TP Link | Green | Off | UTP link is broken |
TP Link | Green | Blinking | UTP link is failing |
Note: Exact configuration of LEDs is unidentified. | |||
My Books
