CODENET-8380, CODENET-8382 Network Card Settings and Configuration

Card Type	Ethernet transceiver
Network Transfer Rate	10Mbps
Data Bus	AUI via DB-15 connector
Topology	Star
Wire Type	Fiber optic cable

CONNECTIONS
Function	Label	Function	Label
AUI via DB-15 port	CN1	Fiber receive connector	CN3
Fiber transmit connector	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Link good function enabled	SW1/1	On
	Link good function disabled	SW1/1	Off
»	SQE heartbeat disabled	SW1/2	On
	SQE heartbeat enabled	SW1/2	Off
»	Point-to-point mode	SW1/3	On
	Passive star mode	SW1/3	Off
»	Jabber lockout resets automatically	SW1/4	On
	Jabber lockout resets only by cycling power	SW1/4	Off
»	Optical transmitter at full power	SW1/5	Off
	Optical transmitter at half power for testing	SW1/5	On
»	Factory configured - do not alter	SW1/6	N/A
»	Factory configured - do not alter	SW1/7	N/A
»	Factory configured - do not alter	SW1/8	N/A

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
JABBER	Yellow	On	Network jabber detected
JABBER	Yellow	Off	Network jabber not detected
HIGH	Yellow	On	Received optical signal too bright
HIGH	Yellow	Off	Received optical signal normal
LINK	Yellow	On	Network connection is broken
LINK	Yellow	Off	Network connection is good
CP	Yellow	On	Network collision detected
CP	Yellow	Off	Network collision not detected
ACT	Green	On	Transceiver is receiving or transmitting to the network
ACT	Green	Off	Transceiver is not receiving or transmitting to the network
POWER	Green	On	Power is on
POWER	Green	Off	Power is off