INTEL CORPORATION
RU430HX
Processor | Pentium |
Processor Speed | 75/90/100/120/133/150/166/180/200MHz |
Chip Set | Intel |
Video Chip Set | S3 |
Maximum Onboard Memory | 128MB (EDO supported) |
Maximum Video Memory | 2MB |
Cache | 256/512KB |
BIOS | AMI |
Dimensions | 229mm x 219mm |
I/O Options | CD-ROM connector, floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VESA feature connector, VGA port, riser slot, IR connectors (2), serial port/USB connector, microphone in connector, line out connector, MIDI/audio input connector, wave table connector, telephony connector |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
VESA feature connector | J1G1 | Serial port/USB connector | J5J2 |
VGA port | J1J1 | Serial port 1 | J6J1 |
IDE interface LED | J2A1 pins 1 & 2 | Soft off connector | J8B1 |
Reset switch | J2A1 pins 3 & 4 | IDE interface 2 | J8C1 |
IR connector | J2A1 pins 6 - 9 | IDE interface 1 | J8C2 |
Chassis fan power | J2A2 pins 1 & 2 | PS/2 mouse port | J8J1 |
Reset switch | J2A2 pins 4 & 5 | Microphone in connector | J8J2 |
Power LED & keylock | J2A2 pins 7 - 10 | Line out connector | J8J3 |
IDE interface LED | J2A2 pins 11 - 14 | Floppy drive interface | J9E2 |
Soft on power connector | J2A2 pins 15 & 16 | Telephony connector | J9F1 |
Green PC connector | J2A2 pins 17 & 18 | Wave table connector | J9G1 |
IR connector | J2A2 pins 20 - 25 | MIDI/audio input connector | J9G2 |
Speaker | J2A2 pins 26 - 29 | CD-ROM connector | J9H1 |
Parallel port | J3J1 | Riser slot | SL1 |
Serial port 2 | J5H1 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Password normal operation | J1F1A | Pins 1 & 2 closed |
Password clear | J1F1A | Pins 2 & 3 closed | |
» | CMOS memory normal operation | J1F1A | Pins 4 & 5 closed |
CMOS memory clear | J1F1A | Pins 5 & 6 closed | |
» | Setup access enabled | J1F1B | Pins 1 & 2 closed |
Setup access disabled | J1F1B | Pins 2 & 3 closed | |
» | Factory configured - do not alter | JP1 | Unidentified |
» | Factory configured - do not alter | JP2 | Unidentified |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (2) 1M x 36 | None |
16MB | (2) 2M x 36 | None |
16MB | (2) 1M x 36 | (2) 1M x 36 |
24MB | (2) 2M x 36 | (2) 1M x 36 |
32MB | (2) 4M x 36 | None |
32MB | (2) 2M x 36 | (2) 2M x 36 |
40MB | (2) 4M x 36 | (2) 1M x 36 |
48MB | (2) 4M x 36 | (2) 2M x 36 |
DRAM CONFIGURATION (CON’T) | ||
Size | Bank 0 | Bank 1 |
64MB | (2) 8M x 36 | None |
64MB | (2) 4M x 36 | (2) 4M x 36 |
72MB | (2) 8M x 36 | (2) 1M x 36 |
80MB | (2) 8M x 36 | (2) 2M x 36 |
96MB | (2) 8M x 36 | (2) 4M x 36 |
128MB | (2) 8M x 36 | (2) 8M x 36 |
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. The location of banks 0 & 1 are unidentified. |
CACHE CONFIGURATION | |
Size | Bank 0 |
256KB | (2) 32K x 32 |
512KB | (2) 64K x 32 |
Note: Board will come factory installed with one of the two above cache sizes. |
VIDEO MEMORY CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | 1MB | None |
2MB | 1MB | (2) 256K x 16 |
Note: Bank 0 is factory installed and is not configurable. |
CPU SPEED SELECTION | ||||
CPU speed | Clock speed | Multiplier | J1F1C | J1F1D |
75MHz | 50MHz | 1.5x | 2 & 3, 5 & 6 | 1 & 2, 4 & 5 |
90MHz | 60MHz | 1.5x | 2 & 3, 5 & 6 | 1 & 2, 4 & 5 |
100MHz | 66MHz | 1.5x | 1 & 2, 5 & 6 | 1 & 2, 4 & 5 |
120MHz | 60MHz | 2x | 2 & 3, 4 & 5 | 2 & 3, 4 & 5 |
133MHz | 66MHz | 2x | 1 & 2, 5 & 6 | 2 & 3, 4 & 5 |
150MHz | 60MHz | 2.5x | 2 & 3, 4 & 5 | 2 & 3, 5 & 6 |
166MHz | 66MHz | 2.5x | 1 & 2, 5 & 6 | 2 & 3, 5 & 6 |
180MHz | 60MHz | 3x | 2 & 3, 4 & 5 | 1 & 2, 5 & 6 |
200MHz | 66MHz | 3x | 1 & 2, 5 & 6 | 1 & 2, 5 & 6 |
Note: Pins designated should be in the closed position. |
CPU TYPE SELECTION | |
Type | J1F1B |
Standard or VR | Pins 4 & 5 closed |
VRE | Pins 5 & 6 closed |