DIAMOND FLOWER, INC.
G586VPM (REV. A)
Device Type | Mainboard |
Processor | Pentium |
Processor Speed | 75/90/100/120/133MHz |
Chip Set | VLSI |
Video Chip Set | None |
Maximum Onboard Memory | 256MB |
Maximum Video Memory | None |
Cache | 256/512/1024KB |
BIOS | Award |
Dimensions | 330mm x 220mm |
I/O Options | 32-bit PCI slots (4), floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), cache slot |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
IDE interface 1 | CN3 | Turbo switch | J4 |
Floppy drive interface | CN4 | Power LED & keylock | J5 |
Parallel port | CN5 | IDE interface LED | J6 |
IDE interface 2 | CN6 | Disk active LED | J7 |
Serial port 2 | CN7 | PS/2 mouse interface | J11 |
Serial port 1 | CN8 | 32-bit PCI slots | PC1 – PC4 |
Reset switch | J2 | Cache slot | SL1 |
Speaker | J3 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | J8 | Open |
» | Factory configured - do not alter | JP2 | Pins 2 & 3 closed |
» | Factory configured - do not alter | JP3 | Pins 2 & 3 closed |
» | Factory configured - do not alter | JP4 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP5 | Pins 1 & 2 closed |
» | PCI IDE enabled | JP9 | Closed |
PCI IDE disabled | JP9 | Open | |
» | Factory configured - do not alter | JP10 | Open |
» | Factory configured - do not alter | JP14 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP15 | Pins 1 & 2 closed |
» | Factory configured - do not alter | JP16 | Pins 2 & 3 closed |
» | Monitor type select color | JP17 | Closed |
Monitor type select monochrome | JP17 | Open | |
» | PS/2 mouse IRQ12 enabled | JP18 | Closed |
PS/2 mouse IRQ12 disabled | JP18 | Open | |
» | Factory configured - do not alter | JP21 | Open |
» | Factory configured - do not alter | JP22 | Open |
Note: The location of J8 is unidentified. |
SIMM CONFIGURATION | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
2MB | (2) 256K x 36 | None | None | None |
4MB | (2) 512K x 36 | None | None | None |
4MB | (2) 256K x 36 | (2) 256K x 36 | None | None |
6MB | (2) 256K x 36 | (2) 256K x 36 | (2) 256K x 36 | None |
8MB | (2) 1M x 36 | None | None | None |
8MB | (2) 256K x 36 | (2) 256K x 36 | (2) 256K x 36 | (2) 256K x 36 |
8MB | (2) 512K x 36 | (2) 512K x 36 | None | None |
12MB | (2) 512K x 36 | (2) 512K x 36 | (2) 512K x 36 | None |
16MB | (2) 2M x 36 | None | None | None |
16MB | (2) 1M x 36 | (2) 1M x 36 | None | None |
16MB | (2) 512K x 36 | (2) 512K x 36 | (2) 512K x 36 | (2) 512K x 36 |
24MB | (2) 2M x 36 | (2) 1M x 36 | None | None |
24MB | (2) 1M x 36 | (2) 1M x 36 | (2) 1M x 36 | None |
32MB | (2) 4M x 36 | None | None | None |
32MB | (2) 2M x 36 | (2) 2M x 36 | None | None |
32MB | (2) 1M x 36 | (2) 1M x 36 | (2) 1M x 36 | (2) 1M x 36 |
40MB | (2) 4M x 36 | (2) 1M x 36 | None | None |
48MB | (2) 4M x 36 | (2) 2M x 36 | None | None |
48MB | (2) 2M x 36 | (2) 2M x 36 | (2) 2M x 36 | None |
64MB | (2) 2M x 36 | (2) 2M x 36 | (2) 2M x 36 | (2) 2M x 36 |
64MB | (2) 8M x 36 | None | None | None |
64MB | (2) 4M x 36 | (2) 4M x 36 | None | None |
72MB | (2) 8M x 36 | (2) 1M x 36 | None | None |
80MB | (2) 8M x 36 | (2) 2M x 36 | None | None |
96MB | (2) 8M x 36 | (2) 4M x 36 | None | None |
96MB | (2) 4M x 36 | (2) 4M x 36 | (2) 4M x 36 | None |
128MB | (2) 8M x 36 | (2) 8M x 36 | None | None |
128MB | (2) 4M x 36 | (2) 4M x 36 | (2) 4M x 36 | (2) 4M x 36 |
192MB | (2) 8M x 36 | (2) 8M x 36 | (2) 8M x 36 | None |
256MB | (2) 8M x 36 | (2) 8M x 36 | (2) 8M x 36 | (2) 8M x 36 |
CACHE CONFIGURATION | ||
Size | SL1 | TAG |
256KB | 256KB module installed | Unidentified |
512KB | 512KB module installed | Unidentified |
1MB | 1MB module installed | Unidentified |
Note: The location of the TAG is unidentified. |
CACHE JUMPER CONFIGURATION | |||||
Size | JP6 | JP7 | JP8 | JP19 | JP20 |
256KB (A) | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
512KB (A) | 2 & 3 | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 |
512KB (B) | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 | 1 & 2 |
1MB (B) | 2 & 3 | 1 & 2 | 2 & 3 | 2 & 3 | 2 & 3 |
Note: Pins designated should be in the closed position. (A) = 32-byte line size. (B) = 64-byte line size. |
CPU SPEED SELECTION | ||||
CPU speed | Clock speed | Multiplier | J1 | JP13 |
75MHz | 50MHz | 1.5x | 1 & 2 | 2 & 3 |
90MHz | 60MHz | 1.5x | 1 & 2, 5 & 6 | 2 & 3 |
100MHz | 66MHz | 1.5x | 1 & 2, 3 & 4, 5 & 6 | 2 & 3 |
100MHz | 50MHz | 2x | 1 & 2 | 1 & 2 |
120MHz | 60MHz | 2x | 1 & 2, 5 & 6 | 1 & 2 |
133MHz | 66MHz | 2x | 1 & 2, 3 & 4, 5 & 6 | 1 & 2 |
Note: Pins designated should be in the closed position. |