CSS LABORATORIES, INC.
PREFERRED 433GA
Processor | 80486DX |
Processor Speed | 33MHz (upgradable to 50MHz with CPU module) |
Chip Set | C & T |
Max. Onboard DRAM | 32MB |
SRAM Cache | 64/256KB |
BIOS | AMI |
Dimensions | 330mm x 218mm |
I/O Options | 32-bit external CPU/NPU card slot, 32-bit local video card slot, auxiliary keyboard, floppy interface, IDE interface, parallel port, serial port (2) |
NPU Options | 4167 (on 32-bit external CPU/NPU card) |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Speaker | J4 | IDE interface LED | LED |
External battery | J9 | Floppy drive interface | PJ1 |
Power LED & keylock | J10 | Parallel port | PJ2 |
Auxiliary keyboard | J11A | Serial port 1 | PJ3 |
Reset switch | J13/pins 1 & 2 | Serial port 2 | PJ4 |
Turbo switch | J13/pins 3 & 4 | IDE interface | PJ5 |
Front panel switches & LEDs | J39 | 32-bit external CPU/NPU card | SL1 |
Hard drive access LED | J40 | 32-bit MaxGraphics video card | SL2 |
USER CONFIGURABLE SETTINGS | |||
Function | Jumper | Position | |
» | Floppy interface enabled | FDDEN | pins 2 & 3 closed |
Floppy interface disabled | FDDEN | pins 1 & 2 closed | |
» | IDE interface enabled | IDEEN | pins 2 & 3 closed |
IDE interface disabled | IDEEN | pins 1 & 2 closed | |
» | Factory configured - do not alter | J3 | open |
» | Monitor type select color | J12 | pins 2 & 3 closed |
Monitor type select monochrome | J12 | pins 1 & 2 closed | |
» | Factory configured - do not alter | JP1 & JP2 | unknown |
SRAM JUMPER CONFIGURATION | |||||
Size | J2 | J5 | J6 | J7 | J8 |
64KB | open | open | open | pins 2 & 3 | pins 2 & 3 |
256KB | closed | closed | closed | pins 1 & 2 | pins 1 & 2 |
Note:Pins designated should be in the closed position. |
SRAM CONFIGURATION | ||
Size | Cache SRAM | TAG |
64KB | (8) 8K x 8 | (1) 8K x 8 |
256KB | (8) 32K x 8 | (1) 32K x 8 |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
1MB | (4) 256K x 9 | NONE |
2MB | (4) 256K x 9 | (4) 256K x 9 |
4MB | (4) 1M x 9 | NONE |
5MB | (4) 1M x 9 | (4) 256K x 9 |
8MB | (4) 1M x 9 | (4) 1M x 9 |
16MB | (4) 4M x 9 | NONE |
17MB | (4) 4M x 9 | (4) 256K x 9 |
20MB | (4) 4M x 9 | (4) 1M x 9 |
32MB | (4) 4M x 9 | (4) 4M x 9 |
SERIAL PORT 1 (PJ3) CONFIGURATION | |||||
COM | IRQ Interrupt | I/O Address | Jumper PJ6 | S0 | S1 |
COM 2 | IRQ3 | 2F8h | pins 1 & 3 | pins 1 & 2 | pins 2 & 3 |
COM 1 | IRQ4 | 3F8h | pins 1 & 2 | pins 2 & 3 | pins 2 & 3 |
Disabled | N/A | N/A | N/A | pins 1 & 2 | pins 1 & 2 |
Note:Pins designated should be in the closed position. |
SERIAL PORT 2 (PJ4) CONFIGURATION | |||||
COM | IRQ Interrupt | I/O Address | Jumper PJ6 | S2 | S3 |
COM 1 | IRQ4 | 3F8h | pins 2 & 4 | pins 1 & 2 | pins 2 & 3 |
COM 2 | IRQ3 | 2F8h | pins 3 & 4 | pins 2 & 3 | pins 2 & 3 |
Disabled | N/A | N/A | N/A | pins 1 & 2 | pins 1 & 2 |
Note:Pins designated should be in the closed position. |
PARALLEL PORT 1 (PJ2) CONFIGURATION | |||||
LPT | IRQ Interrupt | I/O Address | Jumper P0 | Jumper P1 | Jumper PRT |
LPT 1 | IRQ7 | 3F8h | pins 1 & 2 | pins 2 & 3 | pins 2 & 3 |
LPT 2 | IRQ5 | 2F8h | pins 2 & 3 | pins 2 & 3 | pins 1 & 2 |
LPT 3 | IRQ7 | 3BCh | pins 2 & 3 | pins 1 & 2 | pins 2 & 3 |
Disabled | N/A | N/A | pins 1 & 2 | pins 1 & 2 | N/A |
Note:Pins designated should be in the closed position. |