ADC KENTROX
DATASMART MAX MODEL 72561
Card Type | T1 CSU/DSU |
Chipset | Unidentified |
T1 Transfer Rate | 1.544Mbps |
T1 Protocol | AMI, B8ZS |
Frame Type | SF, ESF, Ericsson |
Data Bus | Serial |
CONNECTIONS | |||
Function | Label | Function | Label |
PREVIOUS button | BT1 | V.24 DCE serial control port | CN5 |
NEXT button | BT2 | V.24 DTE serial control port | CN6 |
ESCAPE button | BT3 | EIA-530 or V.35 serial data port 1 | CN7 |
SELECT button | BT4 | EIA-530 or V.35 serial data port 2 | CN8 |
Monitor receive port | CN1 | AC power in | CN9 |
Monitor transmit port | CN2 | LCD display | LCD |
T1 line out (Network interface) | CN3 | PCMCIA slot | SL1 |
RS-422 auxiliary clock port | CN4 | ||
Note:Standard V.35 serial ports are available on included adapter cables. |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
TXD | Yellow | On | DSU is receiving data from data port indicated by LED1-2 |
TXD | Yellow | Off | DSU is not receiving data from data port indicated by LED1-2 |
RXD | Yellow | On | DSU is transmitting data to data port indicated by LED1-2 |
RXD | Yellow | Off | DSU is not transmitting data to data port indicated by LED1-2 |
CTS | Yellow | On | Data port indicated by LED1-2 CTS is high |
CTS | Yellow | Off | Data port indicated by LED1-2 CTS is low |
DIAGNOSTIC LED(S) (CON’T) | |||
LED | Color | Status | Condition |
RTS | Yellow | On | Data port indicated by LED1-2 RTS is high |
RTS | Yellow | Off | Data port indicated by LED1-2 RTS is low |
1 | Yellow | On | TXD, RXD, CTS, and RTS LEDs indicate status of data port 1 |
1 | Yellow | Blinking | Loss of Signal detected on data port 1 |
1 | Yellow | Off | TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 1 |
2 | Yellow | On | TXD, RXD, CTS, and RTS LEDs indicate status of data port 2 |
2 | Yellow | Blinking | Loss of Signal detected on data port 2 |
2 | Yellow | Off | TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 2 |
DATA | Green | On | Valid data signal detected on T1 network interface |
DATA | Green | Off | No valid signal detected on T1 network interface |
RED | Red | On | Loss Of Signal condition detected on T1 network interface |
RED | Red | Slow blink | Alarm Indication Signal condition detected on T1 network interface |
RED | Red | Fast blink | T1 network interface signal is out of frame synchronization |
RED | Red | Off | No red alarm conditions detected on T1 network interface |
YEL | Yellow | On | Remote Loss Of Signal or out of frame synchronization condition detected on T1 network interface |
YEL | Yellow | Off | No remote Loss Of Signal or out of frame synchronization condition detected on T1 network interface |
TEST | Yellow | On | Local loopback test in progress |
TEST | Yellow | Blinking | Test code, remote loopback, or Bit Error Rate Test in progress |
TEST | Yellow | Off | No tests are in progress |
PWR | Green | On | Power is on |
PWR | Red | On | Self-test failed |
PWR | Green | Blinking | User is logged in |
PWR | Alternating green/red | Blinking | Downloading software |
PWR | N/A | Off | Power is off |