lotus

previous page: Hard Drive: QUANTUM: SIROCCO 2550AT 2550MB 3.5"/SL    ATA2 FAST
  
page up: Hard Drive Specs from QUANTUM
  
next page: Hard Drive: QUANTUM: SP-3430 4300MB 3.5"/HH    SCSI2 FAST

Hard Drive: QUANTUM: SIROCCO 2550S 2550MB 3.5"/SL SCSI3 FAST




S I R O C C O   2 5 5 0 S    QUANTUM
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        |     |     |
Capacity form/unform  2550/      MB        Heads           6|     |     |
Seek time   / track  11.0/ 2.5 ms          Sector/track     |     |     |
Controller           SCSI3 SI/FA           Precompensation
Cache/Buffer           128 KB ADAP./SEGMEN Landing Zone
Data transfer rate    5.500 MB/S int       Bytes/Sector      512
                     10.000 MB/S ext SYNC
Recording method     PRML 16/17                     operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 65
Power: sleep              W     Humidity     %         5 85    |      5 95
       standby        0.8 W     Altitude    km            2.137|        12.192
       idle           4.2 W     Shock        g        10       |     70
       seek           6.5 W     Rotation   RPM      4500
       read/write         W     Acoustic   dBA        33
       spin-up            W     ECC        Bit   160BIT REED SOLO.,ON THE FLY
                                MTBF         h     400000
                                Warranty Month        36
Lift/Lock/Park     YES          Certificates                                  

Jumpers

QUANTUM VP32170/32550S SATURN JUMPER SETTING

Jumper Setting
==============

* = factory default

 J5 TE Termination Enable Jumper
 -------------------------------
  +---------+-----------+--------------------------------------------+
  | Jumper  | Setting   | Description                                |
  +---------+-----------+--------------------------------------------+
  |   TE    | OPEN      | Termination Disabled                       |
  |         | CLOSED x  | Termination Enabled                        |
  +---------+-----------+--------------------------------------------+
  |   TP    | CLOSED    | Termination Power Enabled                  |
  |         | OPEN      | Termination Power Disabled                 |
  +---------+-----------+--------------------------------------------+

One of the requirements of the SCSI bus is that it be properly
terminated. If more than one SCSI device is connected to the host,
only the last one must be terminated. The TE (Termination Enable)
jumper, when installed, enables an active termination circuit,
thereby terminating the SCSI bus. With the TE jumper off, bus
termination is disabled.

NOTE
There are no Terminator Resistor packs to remove on the Saturn
products.

At the factory, Quantum configures the Saturn VP31080/32170S hard
disk drive with termination enabled; that is, with a jumper installed
across the termination pins on jumper block J5. To disable
termination, remove the jumper from the pins at location J5.

TP Termination Power
--------------------
It is recommended that the drive be configured to provide Termination
Power to the SCSI bus. This ensures that there is sufficient power
along the entire SCSI bus. The Termination Power (TP) jumper, when
installed, enables termination power to be provided by the disk
drive.

At the factory, Quantum configures the Saturn VP31080/32170S hard
disk drive with termination power enabled; that is, with a jumper
installed across the termination power pins on jumper block J5. To
disable termination power, remove the jumper from the pins at
location J5.

A2/A1/A0 SCSI-Bus Device Identification
---------------------------------------
Used in combination, the jumper settings across A2, A1, and A0 de-
termine the Saturn hard disk drive's SCSI-bus device identification
(SCSI ID). By default, Quantum configures the drive with a SCSI ID of
six; that is, with jumpers installed across the pins labeled A2 and
A1, and no jumper installed across the pins labeled A0.

   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          |  A2   |  A1   |  A0   |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  |
   +----------+-------+-------+-------+
   |    1     | OPEN  | OPEN  | CLOSED|
   +----------+-------+-------+-------+
   |    2     | OPEN  | CLOSED| OPEN  |
   +----------+-------+-------+-------+
   |    3     | OPEN  | CLOSED| CLOSED|
   +----------+-------+-------+-------+
   |    4     | CLOSED| OPEN  | OPEN  |
   +----------+-------+-------+-------+
   |    5     | CLOSED| OPEN  | CLOSED|
   +----------+-------+-------+-------+
   |x   6     | CLOSED| CLOSED| OPEN  |
   +----------+-------+-------+-------+
   |    7     | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+

The SCSI bus supports up to eigth devices, including the host system.
A device's identification number determines its priority and must be
unique in the system.

J3 Spin Delay SD Pins 13/14
---------------------------
With the Spin Delay jumper installed, across pins 13-14 of Option
Connector J3, the drive will start power up sequence immediately
when power is applied. With the Spin Delay jumper removed the drive
will power up when a START/STOP command is issued by the host
adapter.

By default, Quantum configures the drive with a jumper installed
across pins 13-14.

J3 Spindle Sync SY Pin 19
-------------------------
Saturn disk drives support synchronized spindle operation. Master or
slave synchronized operation is set through a SCSI Mode Select Page.
When the drive operates as a Master drive, it generates a spindle
synchronization reference signal, SPINDL_SYNC_REF L. When operating
as a slave, the drive synchronizes its spindle according to the
SPINDL_SYNC_REF L input reference. The drive always maintains local
speed regulation when no reference signal is applied.

Pin 19, of Option Connector J3, is provided to facilitate
installations where a 2-pin connector for SPINDL_SYNC_REF L will be
used. For Saturn drives, pin 10 is provided as an alternate
connection to facilitate installations where a 10-pin header is used
to connect several remote features. The ground return is pin 20,
although pins 2, 4, or 6 can be used for ground return.

J3 Write Protect WP Pins 17-18
------------------------------
To enable write protection on the drive, install the referenced
jumper across pin pair 17-18 of Option Connector J3. To disable
write protection from the drive, remove the jumper from pin pair
17-18.

J3 Remote LED Status Display
----------------------------
Busy and Fault status for Saturn VP31080/32170S disk drives can be
monitored remotely by connecting a remote Busy and a remote Fault
display LED to the drive's Option Connector J3.

 Busy status is monitored remotely by connecting the cathode side of
 the remote Busy LED to the BSY_OUT L pin. The anode side of the LED
 connects to the +5 VDC OUT pin.

 Fault status is monitored remotely by connecting the cathode side of
 the remote Fault LED to the FLT_OUT L pin. The anode side of the LED
 connects to the +5 VDC OUT pin.

Pin 07 FLT Out Fault display LED Option

Pin 09 BSY Out Busy display LED Option

 Pin 11     +5VDC LED anode connection

Pin 15 RESERVED Don't use!

General

NEVER

                 Announced but never produced.

                        NEVER PRODUCED!!!













TOP
previous page: Hard Drive: QUANTUM: SIROCCO 2550AT 2550MB 3.5"/SL    ATA2 FAST
  
page up: Hard Drive Specs from QUANTUM
  
next page: Hard Drive: QUANTUM: SP-3430 4300MB 3.5"/HH    SCSI2 FAST