lotus



previous page: Hard Drive: IBM: DYLA-26480 TRAVE.8GS 6480MB 2.5"/SSL   ATA3
  
page up: Hard Drive Specs from IBM
  
next page: Hard Drive: IBM: H2172-A2 172MB 2.5"/SSL   IDE / AT

Hard Drive: IBM: DYLA-28100 TRAVE.8GS 8100MB 2.5"/SSL ATA3




D Y L A - 2 8 1 0 0   T R A V E . 8 G S    IBM
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders    8320|     |     |
Capacity form/unform  8100/      MB        Heads          10|     |     |
Seek time   / track  12.0/ 4.0 ms          Sector/track     |     |     |
Controller           IDE / ATA3            Precompensation
Cache/Buffer           512 KB              Landing Zone
Data transfer rate   11.000 MB/S int       Bytes/Sector      512
                     33.300 MB/S ext UDMA2
Recording method     PRML                           operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 65
Power: sleep          0.1 W     Humidity     %         8 90    |      5 95
       standby        0.3 W     Altitude    km                 |
       idle           2.0 W     Shock        g       125       |    400
       seek           2.6 W     Rotation   RPM      4900
       read/write     2.6 W     Acoustic   dBA
       spin-up        5.0 W     ECC        Bit   SMART
                                MTBF         h
                                Warranty Month        24
Lift/Lock/Park     YES          Certificates                                  

Layout

IBM DYLA-26480/28100 TRAVELSTAR JUMPER SETTING

              +--------------------------------------+
              |                                      |
              |                                      |
              |                                      |
              +--------Interface-------------49------+
              |       **********************1 **47 Jumper
              |       *************x********* **48   |
              +------44----------------------50------+
              +                                      +

Pin position 20 is left blank for secure connector insertion.

 Pin position 49: When grounded, no spin-up at POR when open/pull up,
                  normal spin-up at POR.

Jumpers

IBM DYLA TRAVELSTAR JUMPER SETTING

Jumper Setting
==============

Drive Address Setting
---------------------
A jumper is available at the interface connector to determine the
drive address.

Using Cable Selection, the drive address depends on the condition of
pin 28 of the AT interface cable. In the case when pin 28 is ground
or low, the drive is a Master. If pin 28 is open or high level, the
drive is a Slave.

   ---49--47+
    *   * * | Master
    *   * * | (Default setting)
   ---50--48+

   ---49--47+
    *   * X | Slave
    *   * X |
   ---50--48+

   ---49--47+
    *   * * | Cable Selection
    *   xxx |
   ---50--48+

   ---49--47+
    *   xxx | RESERVED       (MASTER)
    *   * * |
   ---50--48+

   ---49--47+
    *   X * | NEVER ATTACH A JUMPER HERE!
    *   X * |
   ---50--48+

 49-PIN: When grounded, no spin-up at POR
         When open/pull-up, normal spin-up at POR















TOP
previous page: Hard Drive: IBM: DYLA-26480 TRAVE.8GS 6480MB 2.5"/SSL   ATA3
  
page up: Hard Drive Specs from IBM
  
next page: Hard Drive: IBM: H2172-A2 172MB 2.5"/SSL   IDE / AT