Hard Drive: CONNER: CFP-1080S 1080MB 3.5"/SL SCSI2 FAST

C F P - 1 0 8 0 S    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        |     |     |
Capacity form/unform  1080/      MB        Heads           6|     |     |
Seek time   / track  11.0/ 3.0 ms          Sector/track     |     |     |
Controller           SCSI2 SI/FAST         Precompensation
Cache/Buffer           256 KB              Landing Zone
Data transfer rate    4.000 MB/S int       Bytes/Sector      512
                     10.000 MB/S ext SYNC
Recording method     RLL 1/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep          1.0 W     Humidity     %         8 80    |      8 80
       standby        1.0 W     Altitude    km    -0.061  3.048| -0.061 12.192
       idle           3.9 W     Shock        g         5       |     75
       seek           5.6 W     Rotation   RPM      5400
       read/write     4.2 W     Acoustic   dBA        39
       spin-up            W     ECC        Bit
                                MTBF         h     500000
                                Warranty Month        60
Lift/Lock/Park     YES          Certificates                                  

Layout

CONNER CFP-1080S QUICK REFERENCE GUIDE DECEMBER 94, REV. C

  +---------------------------------------------------------+
  |                                                      +T1|XX
  |     +-+HDA                                           || |XX
  |     | |Connector                                     || |XX
  |     | |                                              || |XX I
  |     | |                                              || |XX N
  |     +-+                                          E1-+++ |XX T
  |                                                   +-+++ |XX E J2
  |                                                      || |XX R
  |                                                      || |XX F
  |                                                      || |XX A
  |+-+Spin Sync                                          || |XX C
  ||x|LED Driver                                        T2+ |XX E
  ||x|J3                                             ID0+-E1|XX
  |+-+                                               ID1| | |  1
0E1+-+ID1                                            ID2| | |XX J5
  ||x|J4 SCSI ID                                 Disable+-+ |XX Power
  |+-+0E4 Disable Spin                           Spin       |xx1
  +---------------------------------------------------------+
    ^
    |
    |
    |
    |
    |
    +---------------------------------------------+
                                        -LED      |       A3
                                    SS  +LED            A2 |RESERVED
  ++                                GND  |            A1 | |   | ++
  |+--------------------------------+ +++++ ++++++++++ | | | +-++||
  |                                 |  |||| |||||||||| ++++++++++||
  |                                 +--++++-++++++++++-+++++++++++|
  |                                                               |
  |                                                               |
  +---------------------------------------------------------------+

Jumpers

CONNER CFP-1080S QUICK REFERENCE GUIDE DECEMBER 1994, REV. C

Jumper Setting
==============

 S1-S3 SCSI ID
 -------------
 There are three jumpers available for confoguration of SCSI ID: E1,
 E2, and E3. The following table defines the settings:
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          |E3/0E3 |E2/0E2 |E1/0E1 |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  |
   +----------+-------+-------+-------+
   |    1     | OPEN  | OPEN  | CLOSED|
   +----------+-------+-------+-------+
   |    2     | OPEN  | CLOSED| OPEN  |
   +----------+-------+-------+-------+
   |    3     | OPEN  | CLOSED| CLOSED|
   +----------+-------+-------+-------+
   |    4     | CLOSED| OPEN  | OPEN  |
   +----------+-------+-------+-------+
   |    5     | CLOSED| OPEN  | CLOSED|
   +----------+-------+-------+-------+
   |    6     | CLOSED| CLOSED| OPEN  |
   +----------+-------+-------+-------+
   |    7     | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+
 Use either but not both: E1 to E3 or 0E1 to 0E3. The 0E header is
 not installed on drive configurations with a LED on the PCBA.

Disable Spin: A jumper in the E4 location, disables spin up on power-
on. Disabling spin up on application of power can also be enabled by
setting the DSPN bit in MODE SELECT page 0.

Termination and Jumpers
-----------------------
E1 Enable Term Power

Terminators T1, T2: Remove both unless the Drive is the last one
on the SCSI Cable.

Install

CONNER CFP-1080S QUICK REFERENCE GUIDE DECEMBER 1994, REV. C

Notes on Installation
=====================

 J5 Standard 4-pin Power Connector
 ---------------------------------
 +-----------------------
 | +-----J5-----+ +----   pin 1  +12V
 | | 1  2  3  4 | | 1     pin 2   GND
 | +------------+ +--     pin 3   GND
 +------------------      pin 4   +5V

Mounting Holes
--------------
Side: 6-32 UNC-2B .16 max. insertion
Bottom: 6-32 UNC-2B .22 max. insertion