UNIDENTIFIED
SUPER IDE MODEL 827 VER. 11
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
15-pin game port - internal | CN1 |
40-pin IDE (AT) Interface connector | CN2 |
34-pin control cable connector - floppy drive | CN3 |
10-pin serial port (COM2/4) - internal | CN4 |
10-pin serial port (COM1/3) - internal | CN5 |
25-pin parallel port (LPT1/2) - external | CN6 |
4-pin connector - drive active LED | JP1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Serial Port 1 (CN5) enabled | JP2 | pins 1 & 2 closed |
Serial Port 1 (CN5) disabled | JP2 | pins 2 & 3 closed | |
» | Game Port (CN1) enabled | JP3 | pins 1 & 2 closed |
Game Port (CN1) disabled | JP3 | pins 2 & 3 closed | |
» | Floppy drive enabled | JP4 | pins 1 & 2 closed |
Floppy drive disabled | JP4 | pins 2 & 3 closed | |
» | Parallel Port (CN6) address is 378h (LPT1) | JP5 | pins 1 & 2 closed |
Parallel Port (CN6) address is 278h (LPT2) | JP5 | pins 2 & 3 closed | |
» | Serial Port 1 (CN5) is set to COM1 (3F8h) | JP6 | pins 1 & 2 closed |
Serial Port 1 (CN5) is set to COM3 (3E8h) | JP6 | pins 2 & 3 closed | |
» | Serial Port 2 (CN4) enabled | JP7 | pins 1 & 2 closed |
Serial Port 2 (CN4) disabled | JP7 | pins 2 & 3 closed | |
» | Serial Port 2 (CN4) is set to COM2 (2F8h) | JP8 | pins 1 & 2 closed |
Serial Port 2 (CN4) is set to COM4 (2E8h) | JP8 | pins 2 & 3 closed | |
» | I/O Channel Ready signal disabled | JP9 | open |
I/O Channel Ready signal enabled | JP9 | closed |