PINE TECHNOLOGY
PT-604
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB or 1.44MB drives
CONNECTIONS | |
Function | Location |
9-pin serial port 1 (COM1/3)-internal | CN1 |
25-pin parallel port (LPT1/2)-external | CN2 |
40-pin AT Interface (IDE) connector-internal | CN3 |
34-pin control cable connector-floppy drive | CN4 |
16-pin game port-internal | CN5 |
9-pin serial port 2 (COM2/4)-internal | CN6 |
4-pin connector-drive active LED | CN7 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Floppy drive controller enabled | JP1 | pins 1 & 2 closed |
Floppy drive controller disabled | JP1 | pins 2 & 3 closed | |
» | Hard drive port address is 1F0-1F7h | JP2 | pins 1 & 2 closed |
Hard drive port address is 170-177h | JP2 | pins 2 & 3 closed | |
» | Floppy drive port address is 3F1-3F7h | JP3 | pins 1 & 2 closed |
Floppy drive port address is 371-377h | JP3 | pins 2 & 3 closed | |
» | Hard drive controller enabled | JP4 | pins 1 & 2 closed |
Hard drive controller disabled | JP4 | pins 2 & 3 closed | |
» | Parallel Port (CN2) is set to LPT1 (378h) | JP5 | pins 1 & 2 closed |
Parallel Port (CN2) is set to LPT2 (278h) | JP5 | pins 2 & 3 closed | |
» | Serial Port 1 (CN1) is set to COM1 (3F8h) | JP6 | pins 1 & 2 closed |
Serial Port 1 (CN1) is set to COM3 (3E8h) | JP6 | pins 2 & 3 closed | |
» | Serial Port 2 (CN6) is set to COM2 (2F8h) | JP7 | pins 1 & 2 closed |
Serial Port 2 (CN6) is set to COM4 (2E8h) | JP7 | pins 2 & 3 closed | |
» | Serial Port 2 (CN6) is enabled | JP8 | pins 1 & 2 closed |
Serial Port 2 (CN6) is disabled | JP8 | pins 2 & 3 closed | |
» | Serial Port 1 (CN1) is enabled | JP9 | pins 1 & 2 closed |
Serial Port 1 (CN1) is disabled | JP9 | pins 2 & 3 closed | |
» | Parallel Port (CN2) enabled | JP10 | pins 1 & 2 closed |
Parallel Port (CN2) disabled | JP10 | pins 2 & 3 closed | |
» | Floppy drive controller enabled | JP11 | pins 2 & 3 closed |
Floppy drive controller disabled | JP11 | pins 1 & 2 closed | |
» | Game Port (CN5) enabled | JP14 | pins 1 & 2 closed |
Game Port (CN5) disabled | JP14 | pins 2 & 3 closed |