INI-9100W Hard Disk/Floppy Controller Settings and Configuration
INITIO CORPORATION
INI-9100W
Data bus: | 32-bit PCI |
Size: | Half-length, full-height card |
Hard drive supported: | Up to seven SCSI drives |
Floppy drives supported: | None |
CONNECTIONS | |
Function | Location |
50-pin SCSI connector - internal | J1 |
68-pin SCSI connector - external | J2 |
68-pin SCSI connector - internal | J3 |
4-pin connector - drive active LED | JP4 |
USER CONFIGURABLE SETTINGS | |||
| Function | Location | Setting | |
| » | Active onboard termination (Low) disabled | JP2 | open |
| Active onboard termination (Low) enabled | JP2 | closed | |
| » | Active onboard termination (High) disabled | JP5 | open |
| Active onboard termination (High) enabled | JP5 | closed | |
My Books
