 |
 |
Articles / TULARC / PC info / Hard Disk/Floppy Controller / A-B / |  |
|
|
||||
|
|
|||
|
|
|||
|
||||
|
|
||||
|
   |
|
||
|
AL-4000 Hard Disk/Floppy Controller Settings and Configuration |
|
||
|
||||
|
|
|
||
|
||||
|
|
|
|
||
|
||
|
|
|
|
||
|
|
||
|
||
|
|
|
|
||
|
||
ALWAYS TECHNOLOGY CORPORATION
AL-4000
|
Data bus: |
32-bit, EISA |
|
Size: |
Full-length, full-height card |
|
Hard drives supported: |
Up to seven SCSI devices |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector-drive active LED |
CN1 |
|
50-pin control cable connector-internal |
CN2 |
|
50-pin SCSI connector-external |
CN3 |
|
34-pin data cable connector-floppy drive |
CN4 |
|
MISCELLANEOUS TECHNICAL NOTES |
|
There are no jumpers on the AL-4000, all configuring is done through the firmware. |
|
|
|
|
 |
|