ABP-5142 Hard Disk/Floppy Controller Settings and Configuration
ADVANCED SYSTEM PRODUCTS, INC.
ABP-5142
Card Type | Hard drive controller card |
Hard Drives supported | Up to 7 SCSI devices |
Data Bus | 16-bit ISA |
Card Size | Half-length, half-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
4-pin connector - drive active LED | J1 | 50-pin SCSI connector - internal | J3 |
34-pin cable connector - floppy drive | J2 | 50-pin SCSI connector - external | J4 |
MODE SELECTION | ||||
Mode | SW1/1 | SW1/2 | SW1/3 | SW1/4 |
Plug and Play | Off | Off | On | Off |
Legacy | Off | Off | Off | Off |
Auto I/O port increment | On | Off | Off | Off |
Note: Do not leave the switches set in the auto I/O port increment setting. | ||||
My Books
