PARADISE VGA PROFESSIONAL CARD video card Settings and Configuration
WESTERN DIGITAL CORPORATION
PARADISE VGA PROFESSIONAL CARD
Category | Video |
Video Types Supported | XVGA |
Video Processor | WD PVGA1A |
Highest Resolution Supported | 800 x 600 |
Data Bus Type | 16-bit ISA |
Memory Type | VRAM |
Maximum Onboard Memory | 512KB |
CONNECTIONS | |||
Purpose | Location | Location | Purpose |
15-pin analog video port | CN1 | VGA feature connector | CN2 |
MANUAL 16-BIT BIOS CONFIGURATION | ||
Setting | W1 | |
| » | Initial setup and normal operation | Closed |
16TEST program | Open | |
Note:W1 should remain in the closed position unless the 16TEST program has been run and it recommends removing the jumper. | ||
FEATURE CONNECTOR CLOCK CONFIGURATION | ||
Setting | W2 | |
| » | Enabled | Pins 1 & 2 closed |
Disabled | Pins 2 & 3 closed | |
Note: When enabled, the feature connector supports 800 x 600 graphics and 132 column text modes but it does not provide full support of all signals on the video feature connector. | ||
VGA MODE SWITCHING IMPLEMENTATION | ||
Mode | SW1/2 | |
| » | PS/2 style | On |
PC/AT style | Off | |
AUTOSENSE CONFIGURATION | ||
Mode | SW1/4 | |
| » | Enabled autosense for 16-bit BIOS | On |
Autosense disabled, force 8-bit BIOS | Off | |
FACTORY CONFIGURED - DO NOT ALTER | |
Switch | Position |
SW1/3 | Off |
My Books
