lotus



previous page: 022. Why Doesn't the AHA1542C Card Work With Linux?
  
page up: Linux FAQ
  
next page: 024. Does Linux Support Virtualized File Systems Like RAID?

023. How Can I Get Linux to Work With My Disk?




Description

This article is from the Frequently Asked Questions for Linux, the Free/Open Source UNIX-like operating system kernel that runs on many modern computer systems. Maintained by David C. Merrill with numerous contributions by others. (v1.0).

023. How Can I Get Linux to Work With My Disk?

A: If your disk is an IDE or EIDE drive, you should read the file /usr/src/ linux/drivers/block/README.ide (part of the Linux kernel source code). This README contains many helpful hints about IDE drives. Many modern IDE controllers do translation between "physical" cylinders/heads/sectors, and "logical" ones.

SCSI disks are accessed by linear block numbers. The BIOS invents some "logical" cylinder/head/sector fiction to support DOS.

Older IBM PC-compatible BIOS's will usually not be able to access partitions which extend beyond 1024 logical cylinders, and will make booting a Linux kernel from such partitions using LILO problematic at best.

You can still use such partitions for Linux or other operating systems that access the controller directly.

It's recommend that you create at least one Linux partition entirely under the 1024 logical cylinder limit, and boot from that. The other partitions will then be okay.

Also there seems to be a bit of trouble with the newer Ultra-DMA drives. I haven't gotten the straight scoop on thembut they are becoming a very common problem at the SVLUG installfests. When you can get 8 to 12 Gig drives for $200 to $300 it's no wonder.

[Jim Dennis]

 

Continue to:















TOP
previous page: 022. Why Doesn't the AHA1542C Card Work With Linux?
  
page up: Linux FAQ
  
next page: 024. Does Linux Support Virtualized File Systems Like RAID?