Description
This article is from the Woodworking FAQ
Collection 4, by multiple authors.
65 Re: Re: Quality Routers and Saws
From: lyle@hpindda.HP.COM (Lyle Weiman)
Date: 21 Jul 88 00:50:42 GMT
I would also like to know if the bigger models, 3HP for example, that have
already been mentioned in this string would be an acceptable alternative
for shapers, for doing casual, hobby-type work.
I'm not trying to earn a living doing this but I'm interested in
knowing if the results would be as good as can be obtained with a good-
quality shaper. The difference in price between the two is a big
motivator, but there's also the issue of "How do I find space in the old
garage for these things?" Which models would be good for this purpose?
Assume the router would be mounted to a good, sturdy router table.
I'm particularly interested in being able to shape stile/rails, door
panels, and cut lock mitres. Would the 1/2-collet routers have
any trouble accepting shaper-type cutters?
I read in Fine Woodworking recently an article on shapers, and the author
was definitely recommending against this very thing, stating that anything
that didn't have X horsepower & 1/2-inch collets wasn't nearly as good as
a good shaper.
For the record, I'll echo the negative comments that have already been
made about Sears power tools. I've burned out a 3/8 drill doing stuff the
replacement Makita handles with ease. I would have to think long and hard
about spending money for a Sears power tool, unless it was a situation
where I expected it to last only a short time. The fact that the warranty
they give on hand tools doesn't carry over to power tools tells me they
know it, too.
Continue to:
Share and Enjoy
Bookmark this story so others can enjoy it:
Tags
crafts, woodworking, bandsaw, biscuit joiners, dust collect, jointer, miter saw, motors, planer, router, sander, shop heat, toy safety, ammonia, antique tool, hide glue, motors, wood bending, workbench
